How to Deal with Insufficient Power of the 400kw Diesel Generator

When the diesel engine of the power part of the 400kw diesel generator set is working, many parts relatively slide or rotate at a high speed under a certain load. With the increase of working time, the surfaces in contact with each other must be worn due to friction, gradually destroying the original size and geometric shape. This normal wear and tear is often referred to as natural wear and tear, but it is actually inevitable.

There is also a certain relationship between the power of a diesel engine and the amount of air and the amount of diesel it can burn. At the same time, the temperature and humidity of the air can also affect the power of the diesel engine. High temperature and humidity of the air can also reduce the power of the diesel engine. In addition, there are also comprehensive factors such as insufficient fuel supply, improper adjustment of fuel supply advance angle, insufficient gas supply, improper adjustment of valve clearance, high or low engine temperature, loose or stuck moving parts, etc.

How to deal with insufficient power of 400kw diesel generator set? Dingbo Power will organize the following solutions for you:

1. Check whether the diesel fuel contains too much water or the diesel fuel enters rainwater, etc. If the quality of diesel fuel meets the requirements, the next step of inspection should be carried out.

2. Check whether there are leaking parts in each component of the fuel system of 400kw diesel generator set. If no leaking diesel parts are found in the inspection, then check other aspects of the problem.

3. Check whether the oil supply advance angle of 400kw diesel generator set meets the requirements. If it does not meet the requirements, it should be adjusted according to the technical requirements. If the oil supply advance angle meets the technical requirements, it should be further checked.

4. Remove the diesel filter element and the oil feed screen of the fuel transfer pump for inspection. If the filter element and the screen are relatively clean, the atomization quality of the fuel injector should be checked.

5. Correct the injection pump by professional maintenance personnel.

6. Adjust the valve clearance of 400kw diesel generator set according to the technical requirements.

7. Through the above maintenance, 400kw diesel generator set power is still insufficient, then you should check the 400kw diesel generator set cylinder pressure.

The above is a solution to the insufficient power of 400kw diesel generator set shared by Dingbo Power, a professional diesel generator manufacturer. Dingbo Power hope it will be helpful to all users. Guangxi Dingbo Power Equipment Manufacturing Co., Ltd. was established in 2006. After years of efforts, it has grown into a professional diesel generator set manufacturer. Dingbo Power has a modern production base, professional technology research and development team, advanced manufacturing technology, perfect quality management system, and can also customize 30KW-3000KW various specifications of ordinary, automatic, four protection, automatic switching and three remote monitoring according to customer needs Low noise, mobile, automatic grid connected system and other special power demand diesel generator sets. If you are interested in diesel generator set, please contact us by email dingbo@dieselgeneratortech.com.