How to Install the Fuel Pipe of Diesel Generator Set

Jul. 03, 2021

The fuel pipeline of diesel generator set shall be carbon steel or stainless steel seamless steel pipe, and galvanized pipe shall not be used. The oil pipe direction shall avoid the influence of excessive fuel consumption caused by engine heat dissipation. Today, the installation method of oil pipe of generator set is introduced by Dingbo power.


There are not only oil inlet pipe but also oil return pipe in the fuel pipe of generator set. The diameter of the fuel inlet pipe depends on the inlet diameter of the fuel pump, which should be at least the same as the inner diameter of the inlet port; If the distance is too long, the diameter of the fuel pipe should be increased appropriately.

 

The initial freezing point and freezing point of diesel oil should also be paid attention to when selecting the oil pipe. When the temperature of diesel oil is close to these two values, it will become viscous, and the diameter of the pipe should be increased appropriately.The filter should consider the pressure drop of the joint and pressure reducing valve. The connection between the pipeline and the unit should be flexible, as close as possible to the fuel pump of the unit. Exposed pipes shall be properly supported, protected and prevented from cracking, and shall not enter into heat pipes, furnaces, wires or exhaust pipes.If the ambient temperature is high, insulation measures should also be taken. After the pipeline is installed, no matter there is air in the pipeline, it is necessary to carry out cleaning and leak proof inspection, and install a small cock at the height of the pipeline for the discharge of the pipeline.


How to Install the Fuel Pipe of Diesel Generator Set?cid=55

 

Diesel generator fuel line.

 

The return pipe returns the excess fuel in the working cycle to the daily fuel tank, and its heat will dissipate in the tank. Note: the oil return pipe shall not be directly connected to the oil inlet pipe of the unit. Under normal conditions, the oil return pipe shall enter the storage tank and daily oil tank above the highest oil level. The return pipe of each unit shall return directly to the oil tank instead of merging the return pipe with other units. The size of oil return pipe shall not be smaller than that of oil supply pipe.

 

Finally, it should be noted that the maximum allowable temperature of fuel in front of the oil pipe injection pump of the generator set is 60 to 70, depending on the model. Dingbo power recommends that the flexible connection be used between the engine and the oil pipeline, and ensure that the oil pipeline between the engine and the oil tank will not leak.

 

Guangxi Dingbo Power Equipment Manufacturing Co., Ltd., established in 2006, is an OEM manufacturer of diesel generator brand in China, which integrates design, supply, commissioning and maintenance of diesel generator set. From product design, supply, commissioning and maintenance, it provides you with all-round pure spare parts, technical consultation, installation guidance, free commissioning, free maintenance and repair of diesel generator set Unit transformation and personnel training, five-star worry free after-sales service.

 

If you are interested in diesel generator set, please contact us by email dingbo@dieselgeneratortech.com,we will provide the best service and the best products to you. 



Follow Us

WeChat

WeChat

Contact Us

Mob.: +86 134 8102 4441

Tel.: +86 771 5805 269

Fax: +86 771 5805 259

E-mail: dingbo@dieselgeneratortech.com

Skype: +86 134 8102 4441

Add.: No.2, Gaohua Road, Zhengxin Science and Technology Park, Nanning, Guangxi, China.

Get in Touch

Enter your email and receive the latest news from us.

Copyright © Guangxi Dingbo Power Equipment Manufacturing Co., Ltd. All Rights Reserved | Sitemap Update cookies preferences | privacy-policy
Contact Us