dingbo@dieselgeneratortech.com
+86 134 8102 4441
Jun. 11, 2026
At Dingbo Power, we take pride in delivering reliable power solutions to customers worldwide. At the end of May 206, we successfully delivered a 100kVA silent diesel generator to a customer from New Zealand. This order perfectly demonstrates our commitment to understanding each client's unique needs and providing the right recommendation.
In January 2026, we received an inquiry from a New Zealand customer who needed a diesel generator set but was uncertain about the required power rating. He planned to use a diesel generator to power a welding machine, a compressor, plasma cutting machines, and general engineering workshop electric tools. Additionally, the generator would serve as backup charging for his off-grid solar home during bad weather.
The customer provided a detailed equipment list and mentioned that he works alone – meaning not all devices run simultaneously. For example, the cutting machine is not used while welding.
After careful analysis, we recommended a 100kVA (80kW) diesel generating set. This capacity not only meets the power demand of all connected equipment, including worst-case load scenarios and starting surges, but also provides sufficient margin for recharging the off-grid solar home, ensuring safe and reliable electricity.
The customer agreed with our proposal and requested the installation of four waterproof sockets. Following his requirements, we equipped the generator set with two IP66 5-pin industrial waterproof sockets (three-phase, 32A output) and two 3-pin waterproof sockets (single phase, 15A and 16A output)

The customer preferred the Cummins engine and Stamford alternator. We matched his request with the reliable Cummins 4BTA3.9-G13 engine and the Stamford UCI274C1 alternator, a proven combination known for durability and performance in harsh environments.
Below is the main engine technical data:
| Engine Model | 4BTA3.9-G13 |
| Number of Cylinders | 4 cylinders |
| Cycle | 4 stroke |
| Aspiration | Turbocharged |
| Bore×Stroke | 102mm x120mm |
| Displacement | 3.9L |
| Compression ratio | 18.0:1 |
| Prime Power/Speed | 87KW / 1500rpm |
| Standby Power/Speed | 97KW / 1500rpm |
| Speed Governor | Electronic |
| Cooling System | Forced water cooling cycle |
| Minimum Required Lube System Capacity - Sump plus Filters | 10.9L |
| Coolant capacity-engine only | 7.2L |
| Fuel Consumption at prime power 100% Load | 18.8L/h |
| Starter Motor | DC24V |
| Battery charger | DC24V |
Before shipment, we conducted a full load bank test on the generator. The load test video, as well as footage showing the installed waterproof sockets, were shared with the customer. He expressed his satisfaction with the quality and workmanship.
We are grateful for this customer’s trust and support. His satisfaction upon receiving the 80kW silent generator at the end of last month reaffirms our approach: listen carefully, recommend honestly, and deliver reliably.
At Dingbo Power, we don't just sell generator sets, we provide tailored power solutions for customers around the globe. If you have a similar requirement, contact us today.
Previous None
Quicklink
Mob.: +86 134 8102 4441
Tel.: +86 771 5805 269
Fax: +86 771 5805 259
E-mail: dingbo@dieselgeneratortech.com
WhatsApp: +86 134 8102 4441
Add.: No. 10 Kechuang Road, High tech Zone, Nanning, Guangxi, China