Gyara saitin janareta aiki ne mai mahimmanci don tabbatar da aiki na yau da kullun.ƙwararrun injiniyoyi ya kamata su yi aikin injinan dizal ɗin Dingbo yau da kullun.

Kula da Diesel Genset na yau da kullun

Kowace rana, kafin farawa , duba sassan injin na waje, kamar haka:

1. Duba matakin ruwa mai sanyaya, matakin mai da matakin mai.

2. Bincika idan akwai yabo a cikin tsarin man fetur, tsarin sanyaya, tsarin lubrication ko a kan mahaɗin.

3. Bincika idan haɗi da ɗaure sassa na waje da na'urorin haɗi suna cikin yanayi mai kyau.

4. Cire mai da ƙura a saman kuma tsaftace ɗakin injin.

Bayan farawa

1. Duba matakin sanyaya ruwa, idan mai sanyaya bai isa ba, buɗe tashar mai cika kuma ƙara mai sanyaya.

2. Duba matakin mai.

3. Duba matakin man fetur

4. Bincika "Leakales Uku": Babu ɗigon ruwa, zubar iska ko ɗigon mai akan abin hawa.

5. Duba bel

6. Bincika idan sautin injin yana al'ada.

7. Bincika idan gudun da jijjiga na inji al'ada ne.

8. Duba sealing na ci da shaye bututu da Silinda gasket.

50-80 hours

1. Tsaftace tace iska kuma maye gurbin shi idan ya cancanta.

2. Sauya matatar diesel, tace iska da tace ruwa.

3. Duba tashin hankali na drive bel.

4. Add man shafawa ga duk nozzles da lubricating sassa.

5. Canja ruwan sanyi.

250-300 hours

1. Tsaftace fistan, fistan fil, silinda liner, piston zobe da haɗa sandar bearing da duba idan sun sa.

2. Bincika idan zoben ciki da na waje na babban abin birgima ba su kwance.

3. Tsaftace ma'auni da laka a cikin tashar tsarin ruwa mai sanyaya.

4. Tsaftace ajiyar carbon a cikin ɗakin konewar Silinda da ci da shayewar hanya.

5. Bincika madaidaicin lalacewa na bawul, kujerar bawul, sandar turawa da hannu, da yin daidaitawar niƙa.

6. Tsaftace ma'ajiyar carbon akan rotor na turbocharger, duba lalacewa na ɗaukar nauyi da impeller, kuma gyara su idan ya cancanta.

7. Bincika kusoshi na hada-hadar tsakanin injin janareta da injin dizal don sako-sako da zamewar hakora.Idan an sami wata matsala, gyara kuma musanya su.

500-1000 hours

1. Duba kuma daidaita kusurwar allurar mai.

2. Tsaftace tankin mai.

3. Tsaftace kwanon mai.

4. Duba atomization na bututun ƙarfe.

Don daidai aikin ku da kula da janareta na dizal, da fatan za a karanta a hankali aiki da umarnin kulawa, kuma ku yi aiki da shi daidai gwargwadon ƙa'idodin da suka dace.